1. Position REINFORCER Boxes over/under sound field loudspeakers.

2. Attach to loudspeakers or wall with Velcro or double back tape.

3. Run cables from satellite REINFORCER BOX and CENTERING Box to MAIN Box through opening in bottom. 

4. Plug in flat modular cables into jacks on the top right side of LED board.

5. Route AC power pack cable to power jack on bottom of RF Receiver. Note: LED glows when properly connected

6. Place hand-held RF transmitter near audiometer in test room to complete installation.

1. Position Reinforcer boxes over/under sound field loud speakers

2. Attach to loudspeakers or wall with Velcro or double back tape

3. Run cables along wall back to jack panel. Tie down wires as needed.

4. Run cables through hole in jack panel to test room and plug into jacks on back of the control console.

5. Connect AC power pack to console to complete installation.

 WIRED SPECIFICATIONS:

Triangular Boxes: 8 3/4” W x 10” H x 9.5”D
Center Box: 8” W x 7”D x 10” H
Power Supply: 9 volt DC 1200 mA
Lamps: #47 Bayonet Base Lamps
Cable Length: 20 Feet
Connectors: Modular Phone Plugs
Control Console: 5” H X 4” W X 2” D
Mounting:Optional installation kit

WIRELESS SPECIFICATIONS:

Triangular Boxes: 8 3/4” W x 10” H x 9.5”D
Center Box: 8” W x 7”D x 10” H
Handheld Remote: 5 /2" x 3 1/4" x7/8"
Power Supply: 9volt DC 1200 mA
Lamps: #47 Bayonet Base Lamps
Mounting: Optional installation kit
Transmission Range: 50 feet

VIDEO SPECIFICATIONS:

Monitor: 15" Color LCD, 14.5"W x 11.8"H x 2.4"D
Handheld Remote: 2 button :5 1/2"H x 3 1/4"W x7/8"D
4 button: 3.5"H x 1.25"W x .75"D
Power Supply: 12 Volt DC 4.5"H x 1.25"W x 1.25"D
Mounting Brackets: Flush wall mount or Dual arm wall mount.
Software Version: 1.0 Flash Card (Upgradeable to 2.0 larger memory)

 

 

WARRANTY

The REINFORCER VRA is warranted for a period of 2 years from the date of purchase against all manufacturing defects and workmanship. Defective products may be returned to the factory with authorization for repair or replacement upon the manufacturer’s choice. Batteries, cords, and mechanical damage, negligence and product abuse are subject to discretion of the manufacturer as a warranty claim.

WIRELESS INSTALLATION

1. Position REINFORCER Boxes over sound field loudspeakers using table-top
mount or wall mounting brackets. Assure each panel’s secure mounting.

2. Route Power Pack power cords to nearest outlet
.
3. Turn Power Switch ON (found on back side of each display panel)*

4. Place hand-held RF transmitter near audiometer to complete installation.

* Some panels will have auto-power on capabilities and no power switch on back.

INSTALLATION KIT

All items necessary to install the Wired or Wireless VRA systems including:

º 3 L-shaped mounting brakets

º Power and Centering Box Cables

º 10 Wire ties

º 10 Adhesive clips

º Hardware

º Spare Lamps

º Velcro and Extension cable for long sound booths

Owners Manuals

WR-400 VRA Manual.pdf
Video VRA Manual.pdf
XM-1000 VRA Manual.pdf